I bought a WRT610N, went through the installation and it doesn't bloody work (hooray, well done linksys, another success story).

I'm with telefonica ADSL2+, its an ADSL2+ router. I chose PPPoE and enter the username "adslppp@telefonicanetpa" and the same password. I put MTU to auto.

This is the only configuration I could find, and that's it. Its strange that there is no VPI/VCI, etc.

Can someone on telefonica please post there settings?

A buddy of mine uses these settings :
User name:adslppp@telefonicanetpa
Password:adslppp
Protocol: PPPoE
VPI:8
VCI:35

i found these settings on various pages through google también.


and, not sure if you read spanish but there's a lot of info on questions like this on :

damn, that's what i've got but it doesn't work... you don't happen to know the provided router username / password defaults?

I tried admin/admin , admin/password , admin/1234, but no luck!


Just to clarify, this is a router without a modem, I am trying to get my telefonica router to pass through the connection to this wireless N router, but it doesn't find an internet connection

1234 /1234 is what i once had.

try these :
1234/1234
user/user
root/root
12345/12345
123456/123456
config/config
admint/ admint
adminttd / adminttd
admintde/admintde
admin / "blank"

what's the model of the telefonica router ?

fuckers, username AND password is 1234.

edit: well looks like you posted before i replied

1. Connect telefonica router to phone line and turn on
2. Connect Linksys router to pc (blue), and power on
You should have this:
Phone <-> telefonica
and
Linksys <-> PC
3. Connect to 192.168.1.1. Set router ip to 192.168.2.1
4. Plug your telefonica into your linksys internet port (yellow)
You should now have this:
Phone <-> telefonica <-> linksys <-> PC
5. Reboot your pc or refresh connection

The wizards, etc all fail EPICLY to do this simple setup, don't plug the routers together or it will fail (192.168.1.1 collision), don't boot the modem after the router like i did... you won't get internet

lol.