is it jus me or is a4af on teh latest version or 2 ov teh mule sucky?!
i put a file (and only one) on auto a4af and also try 2 do it manually but it says 'asked for another file (swap blocked):file name*' under the status column
| www.dead-donkey.com https://forum.dead-donkey.com/ |
|
| A4AF https://forum.dead-donkey.com/viewtopic.php?f=31&t=6831 |
Page 1 of 1 |
| Author: | Purple.Nightmare [ Wed Dec 22, 2004 3:22 am ] |
| Post subject: | A4AF |
is it jus me or is a4af on teh latest version or 2 ov teh mule sucky?! i put a file (and only one) on auto a4af and also try 2 do it manually but it says 'asked for another file (swap blocked):file name*' under the status column
|
|
| Author: | Polityk [ Wed Dec 22, 2004 4:46 am ] |
| Post subject: | |
The automatic a4af has always sucked ass. |
|
| Author: | spudthedestroyer [ Wed Dec 22, 2004 5:49 am ] |
| Post subject: | |
works in some mods though, never had it work in the official mod mind 
|
|
| Author: | Purple.Nightmare [ Wed Dec 22, 2004 11:34 am ] |
| Post subject: | |
well on the pre .43b sivka mods (which were my preffered mods for about a year) auto used to work sweet and doing it manually was kool as well but all mods i tried .43b adn above i experience the same, that includes sivka .43b and morph and pawcio .43 and .44, jus dont wanna work  and wot is this (swap blocked) i've not seen b4 
|
|
| Author: | DropDeadFred [ Wed Dec 22, 2004 2:30 pm ] |
| Post subject: | |
Works for me with the latest MorphXT. Sometimes it may take awhile (30min or so), but it works eventually. |
|
| Author: | avatar [ Wed Dec 22, 2004 5:21 pm ] | ||
| Post subject: | |||
the same here. first i used sivka 0.43 and now pavcio 5.15f. thing is that you have to set it to a4af when you start the client. then it works fine. if you forget to do so it still works but much slower, because the client already found and distributed all the available sources. |
|||
| Author: | Purple.Nightmare [ Wed Dec 22, 2004 11:56 pm ] |
| Post subject: | |
i did set it at startup (before i connected to a server) but after 3 days uptime it still hadnt swapped (and i tried manually a few times as well) and as wrote above it shows 'swap blocked' i had to pause all files except the particular one to kick it off!
|
|
| Page 1 of 1 | All times are UTC [ DST ] |
| What's blood for, if not for shedding? | |