www.dead-donkey.com https://forum.dead-donkey.com/ |
|
Is there a quicker way to format? https://forum.dead-donkey.com/viewtopic.php?f=31&t=9259 |
Page 1 of 1 |
Author: | PC_Arcade [ Sat Aug 20, 2005 2:06 pm ] |
Post subject: | Is there a quicker way to format? |
I've just installed a 600Gb RAID and windows is now formatting it (I did it via the commandline so I get a %complete) Is there a quicker way to format the disks? Windows is taking FOREVER, it's been at 0% for absolutely ages |
Author: | spudthedestroyer [ Sat Aug 20, 2005 2:34 pm ] |
Post subject: | |
yeah, don't use windows to format ![]() When i installed 400GB RAID and formatted though, it didn't take very long at all, it didn't get stuck at 0%. Have you installed your raid correctly, in 0? |
Author: | PC_Arcade [ Sat Aug 20, 2005 3:17 pm ] |
Post subject: | |
Yeah, using PM now and it seems to be working, still gonna be slow though ![]() |
Author: | PC_Arcade [ Sat Aug 20, 2005 7:59 pm ] | ||
Post subject: | |||
Turns out one of the drives was faulty ![]() One of them formatted fine, the other isn't even seen by windows |
Author: | barry [ Sat Aug 20, 2005 10:07 pm ] | ||||
Post subject: | |||||
Eh? I thought you put them in RAID? |
Author: | PC_Arcade [ Sat Aug 20, 2005 10:10 pm ] |
Post subject: | |
I did, then because it wasn't working I tested them separately |
Author: | barry [ Sat Aug 20, 2005 10:16 pm ] | ||
Post subject: | |||
Ah. Probably a good time to point my experience with RAID was that it provided no improvement's what so ever. |
Author: | PC_Arcade [ Sat Aug 20, 2005 10:30 pm ] |
Post subject: | |
excellent, if that's the case it'll save some time when WD replace the drive ![]() |
Author: | spudthedestroyer [ Sun Aug 21, 2005 1:38 pm ] |
Post subject: | |
barry, my SATA RAID read/write rate is way, way, higher than standard SATA. There's a big improvement here. If its a network drive RAID owns standalone. |
Page 1 of 1 | All times are UTC [ DST ] |
What's blood for, if not for shedding? |